A curve, not a corner
The two archway returns were formed on site over four days by a single plasterer working from a plywood template. There isn't a straight edge in either doorway.

A curved, light-filled family home in Jacka, where every archway was set out by hand.
Ovida Studio's brief was a home with no hard corners in the rooms people use most. Curved plaster returns replace square cornices, and two archways line up through the living wing so light from the rear courtyard reaches all the way to the front door.
Every wall between the kitchen and the dining room was set out on site with a laser level before a single stud went in. Building architectural homes in Canberra often comes down to moments like this, because a curve that's a few millimetres out reads as a mistake, not a feature.
Site area
420 m²
Internal
238 m²
Bedrooms
4
Bathrooms
2
Garage
Double
Star rating
7.3
Photographs
Shot over three visits, at dawn, midday and dusk, so the material palette reads the way the family will actually live in it.






What's inside
Every line here is something we insisted on, not something added to fatten a quote.
Ask about this specificationSignature moments
Small decisions that only reveal themselves once you're living in the house. These are ours for this project.
The two archway returns were formed on site over four days by a single plasterer working from a plywood template. There isn't a straight edge in either doorway.
The kitchen benchtop is a single slab, book-matched at the waterfall end so the veining runs unbroken from the floor to the bench.
An acoustic underlay sits beneath the herringbone oak, so the living areas don't carry footsteps through to the bedroom wing.
Where it stands